Jelly Filled Polyethylene Telephone Cables - Jelly Filled Telephone Cables Manufacturers in India

Jelly Filled Telephone Cables (JFTC)
Solid PE Insulation

Jelly Filled Polyethlene Telephone Cables (JFTC)
Foam Skin Insulation

Cable Aerial Self-supporting Telephone Cables
Solid PE Insulation

Cable Aerial Self-supporting Telephone Cables
Foam/Skin Insulation

Switch Board Cables, Shielded
Solid PVC Insulation

Networking Cables
TIA/EIA Specification

Pulse Code Modulation (PCM) Cables
TEC/IEC/BS Specification

Quad Cables (Jelly Filled & Dry)
IRS/BS Specifaction

Tera Cables India Pvt. Ltd.
Contact Person : Prakash R. Soni (Group C.E.O.)

508, Harekrishna complex, Ashram Road, Paldi,
Ahmedabad - 380 006. INDIA.

Phone : +91-79-26574884
Fax : +91-79-26576742
E-mail : info@teracabindia.com
Web site : www.teracabindia.com

Armouring: In case of Armoured cables-

Bedding of helical lapping of two Polythene tapes applied with overlap to provide mechanical protection to the sheath.
Armour of double layer of galvanized steel tape of required thickness applied helically with a gap not more than 25+ 10% of the width of tape in each layer. The second tape cover the gap of first tape and overlap at least 15% on either side.

Jacket: The cable is jacketed with Virgin black Polythene as per specification (ASTM D 1248).
Identification and Marking: On the finished cable sheath / jacket the cable identification and marking is done by embosing / printing as per the requirment of customer / specification.

>> Jelly Filled Polyethlene Telephone Cables (JFTC) - Foam Skin Insulation

Application: VF Transmission digital system, Local Network,Public, Private and Industrial.
Installation: Direct Burial in ducts.
Construction: The Cable is made up of:
Standards: Generally Complying to
- IEC 60708 - 1
- BT CW 1236
- BTCW 1128
- BTCW 1124
Conductor : Solid plain annealed high conductivity copper round wire of nominal dia 0.32, 0.4, 0.5, 0.65, 0.90 mm. As per IEC 28 & ASTM B3.
Insulation: Foam-Skin extruded Polythene insulation grade stablized. 100% Virigin material and coloured as per requirment ( As per BS 6234 ASTM D 1248).
Pair/Quad: Quad or two coloured insulated conuctors of specified colours twisted together with pre-dertrmined lay to form a pair. In orde to minimize the crosstalk.
Units(U): 10/20 pairs stranded and a open helical binder of polyester / PP/PE Tape of specified colours applied to form a unit.
Super Units (SU):
- Five Nos. - of 10 pairs twisted together to form - 50 pair super unit - OR

five Nos. - of 20 pairs units together to form 100 pair super unit.
Each super unit have an open helical blnder of Polyester / PP/PE tape of specified colour for identification.
Spares pair added in each super unit as per requirements.

Cabling/Filling: For cables above 100 pairs cable the required number of super units are stranded to form a cable core.
- The cable core is fully filled with jelly (water resistance compound) which is compatible with the insulation.
- The filled cable core is wrapped with a tape and the flodding compound is applied.

Screen: A alminium tape coated both side with polythene is applied longitudinally with overlap over the cable core. The laminated alumium tape is sealed at the overlap to prevent moisture.
Sheath: The cable is sheated with Virgin black polythene compound and confirming to the requirment of the specification.(ASTMD 1248

Click for Technical Data

Tera Cab India offer wide ranges of cable as per various national and international Standards and provides their complete cabling solution, the manufacturing ranges of Tera Cab India are : Telecommunication Sector, Power Sector and Cable for Special Application.

We Provides Complete Ranges of Cables & Cabling Solution in the Field of Power & Telecommunication Sector.

Link Exchange Free :: 1000+ Links Free :: Free Link Exchange :: Free Links Directory